Schott Robax vidros especiais vidros vidro para lareira vidro resistente ao fogo vidros para churrasqueira vidro cerâmica 10 3. 4.0 4.0 80° R 2.20 3. Processing and finishing – the finishing touches for optimum effect The standard edge finish for glass-ceramic panels is oriented to DIN 1249. Standard grinding in keeping with Type A is used for flat ROBAX® cut-to-size panels, Type B for curved ROBAX® panels. Type A: custom-ground with chamfered edges Type B: half-round custom-ground 3.1 Edge and corner finish Whether an attractive appearance or top functionality – a variety of processing types and finishes give ROBAX® the finishing touches. For a perfect product entirely in keeping with your wishes. Schott Robax vidros especiais vidros vidro para lareira vidro resistente ao fogo vidros para churrasqueira vidro cerâmica b b ≥ d x y x ≠ y a a ≥ d 11 3. ROBAX® is available with boreholes on request. Boreholes are available with a diameter of 4 mm or more. The position of the boreholes is subject to certain limitations in relation to the edges and corners of the panel as well as to the position of the boreholes to each other. This limitation is generally dependent on: • the nominal thickness of the glass ceramic • the panel dimensions • the diameter of the borehole • the shape of the panel The limitations indicated here apply to panels with a maximum of four boreholes. If the panel has a different hole configuration, other limitations may apply. Details on request. 1. The distance a between the edge of the borehole and the edge of the glass ceramic should not be less than the thickness of the glass ceramic d. 2. The distance b between the edges of the various boreholes should also not be less than d. 3. The position of the boreholes in relation to the corner of the glass ceramic may necessitate that the distance to the two side edges be different. We will be glad to provide you with details on request. 4. The position of the borehole center may deviate by ± 1.5 mm. 3.2 Boreholes