Schott Robax vidros especiais vidros vidro para lareira vidro resistente ao fogo vidros para churrasqueira vidro cerâmica 26 6. • Bending forces are exerted on the corners of the glass panel during locking. They are dependent, among other things, on the position of the boreholes for the locking mechanism (see point 3.2) and the pressure which the user must exert for locking. There is no cause for concern regarding strength as long as the pressure force applied to the panel for this purpose does not exceed 40 N. No design limitations with regard to size and position of the boreholes are necessary as long as the standard recommendations for our product information are adhered to. • Closing the doors one after the other should not lead to excessive bending tension in the panel. If one lock has already been closed, the panel still open should not “stand out” very far, as complete closing is then only possible with torsion stronger than that allowed. Pressure of up to 40 N is permissible in this case as well. • The diameter of the boreholes (see point 3.2) must be chosen in such a manner that expansion of the metallic components (bushings, mounting rails, etc.) as a result of temperature can take place (play). In addition, the edges of the boreholes must be of sufficient quality and have a chamfered edge on both sides. The edges of the panel should be ground. Schott Robax vidros especiais vidros vidro para lareira vidro resistente ao fogo vidros para churrasqueira vidro cerâmica 8. 7. 27 7. Easy to care for You can clean ROBAX® panels with conventional glass cleaners as well as tested and approved glass-ceramic cleaners. Note: Under no circumstances use abrasive sponges, scouring powder, or abrasive cleaners, as these may cause damage to the surface. 8. Easy to dispose of ROBAX® fragments can be disposed of as normal household waste – not in the glass recycling container.